Products

Series WF - Feedthroughs for multiple wires and probes

Pressure and Vacuum Feedthroughs

When multiple wires must pass through a pressure boundary, series WF feedthroughs can provide an efficient seal without recourse to epoxies or other non-adjustable fixture methods.

Different types of these assemblies may be specified according to the type of element required to pass through the feedthrough. Series WF assemblies cater for up to 12 bare or insulated wires – sizes from 24AWG (0.2mm2) to 8AWG (approx. 8.8mm2).

Insulators within WF feedthrough assemblies protect bare wires and provide additional isolation for Kapton® insulated power wires. These are rated max. 55A @ 600Vdc/850Vac max. Feedthroughs with power wires can be supplied as complete assemblies, ready for installation, with wires cut to specified lengths.

WF feedthroughs can also accommodate up to 12, small diameter sensor elements that must be electrically isolated from each other.
  • Seal on Kapton® insulated copper or thermocouple wires – type WFS
  • Seal on bare wires carrying instrumentation voltages – type WFR
  • Seal on small diameter sheathed sensors, max. 3.2mm dia. – type WFP
  • Pressure range: Vacuum to 700 bar*
  • Temperature range: <-200°C to +870°C*

    * Dependent on sealant and fitting selected
  • 316L Body (and seat where applicable). Follower and cap in 303 or 304
  • Choice of sealant materials
  • Individual wires can be replaced without complete disassembly
  • Reusable fitting – sealant and internal components replaceable
  • A large range of feedthroughs is available to buy online

WFS Series - Body Size, Pressure Guide and available Bore Sizes for BSPT, BSPP and NPT Threads2
Kapton® insulated wires - Max 230°C rated

Body Size No. of
Elements
Size 1 (1/8") No. of
Elements
Size 2 (1/4") No. of
Elements
Size 3 (1/2") No. of
Elements
Size 4 (3/4")
Sealant
G* L N T V G* L N T V G* L N T V G* L T V
Wire Size The maximum guide pressure value (in bar) at 20°C is shown for each sealant material according to element size1.
These ratings are a guide and the suitability of any of the products described herein for a particular application
is entirely at the discretion of the purchaser as being the best judge for that particular application.
AWG diam. (mm)
24 Cu or T/C 0.5 2, 4 300 400 250 250 250 2, 4 300 400 250 250 250    
20 Cu or T/C 0.8   2, 4 700 700 400 250 450 6, 8, 12 550 550 250 350
18 Cu 1.0
16 Cu 1.3
14 Cu 1.6   4, 6, 8
12 Cu 2.0
10 Cu 2.5   2, 4
8 Cu 3.2   3
Series WFS feedthroughs are supplied with Kapton® insulated copper or thermocouple material wire to specified lengths, if required. The wires are fitted in the feedthrough, both ends of each wire, or Thermocouple pair, are identified with numbered markers and the feedthrough is torqued ready for installation.

* Graftite™ sealants are conductive. Extra care must be taken where high voltages are present. Please contact TC Ltd for further guidance.
  1. The guide pressures shown for each type of sealant are at 20°C. Spectite® feedthroughs from TC Ltd. have been designed to provide an efficient seal on the elements and restrain them from moving under pressure and vacuum. It is good installation practice to provide additional, mechanical restraint to the elements when differential pressure exceeds 50% of the feedthrough guide pressure value at 20°C. With an increase in temperature, a reduction in the maximum guide pressure value can be expected. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
  2. Other types of process connection are available, see Feedthrough Sizes.

Current ratings for Kapton® insulated copper wire:

Wire Size (AWG) 24 20 18 16 14 12 10 8
Max. current rating (A) at 230°C 600V AC / 850V DC max. 5 9 13 17 24 30 40 55

WFR Series - Body Size, Pressure Guide and available Bore Sizes for BSPT, BSPP and NPT Threads2
Bare wires - Max 230°C rated

Body Size No. of
Wires
Size 1 (1/8") No. of
Wires
Size 2 (1/4") No. of
Wires
Size 3 (1/2") No. of
Wires
Size 4 (3/4")
Sealant L N T V L N T V L N T V L T V
Wire Size - AWG The maximum guide pressure value (in bar) at 20°C is shown for each sealant material according to element size1.
These ratings are a guide and the suitability of any of the products described herein for a particular application
is entirely at the discretion of the purchaser as being the best judge for that particular application.
24 2, 4 400 250 250 250 2, 4 400 250 250 250    
20
18 2, 3, 4, 6, 8 700 400 250 450
14   2, 4 6, 8, 12 550 250 350
8   2, 4
  1. The guide pressures shown for each type of sealant are at 20°C. Spectite® feedthroughs from TC Ltd. have been designed to provide an efficient seal on the elements and restrain them from moving under pressure and vacuum. It is good installation practice to provide additional, mechanical restraint to the elements when differential pressure exceeds 50% of the feedthrough guide pressure value at 20°C. With an increase in temperature, a reduction in the maximum guide pressure value can be expected. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
  2. Other types of process connection are available, see Feedthrough Sizes.

WFP Series - Body Size, Pressure Guide and available Bore Sizes for BSPT, BSPP and NPT Threads2
Kapton® insulated wires - Max 230°C rated

Body Size No. of
Elements
Size 1 (1/8") No. of
Elements
Size 2 (1/4") No. of
Elements
Size 3 (1/2") No. of
Elements
Size 4 (3/4")
Sealant
G* L N T V G* L N T V G* L N T V G* L T V
Wire Size The maximum guide pressure value (in bar) at 20°C is shown for each sealant material according to element size1.
These ratings are a guide and the suitability of any of the products described herein for a particular application
is entirely at the discretion of the purchaser as being the best judge for that particular application.
AWG diam. (mm)
24 Cu or T/C 0.5 2, 4 300 400 250 250 250 2, 4 300 400 250 250 250    
20 Cu or T/C 0.8   2, 4 700 700 400 250 450 6, 8, 12 550 550 250 350
18 Cu 1.0
16 Cu 1.3
14 Cu 1.6   4, 6, 8
12 Cu 2.0
10 Cu 2.5   2, 4
8 Cu 3.2   3
Series WFS feedthroughs are supplied with Kapton® insulated copper or thermocouple material wire to specified lengths, if required. The wires are fitted in the feedthrough, both ends of each wire, or Thermocouple pair, are identified with numbered markers and the feedthrough is torqued ready for installation.

* Graftite™ sealants are conductive. Extra care must be taken where high voltages are present. Please contact TC Ltd for further guidance.
  1. The guide pressures shown for each type of sealant are at 20°C. Spectite® feedthroughs from TC Ltd. have been designed to provide an efficient seal on the elements and restrain them from moving under pressure and vacuum. It is good installation practice to provide additional, mechanical restraint to the elements when differential pressure exceeds 50% of the feedthrough guide pressure value at 20°C. With an increase in temperature, a reduction in the maximum guide pressure value can be expected. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
  2. Other types of process connection are available, see Feedthrough Sizes.

Enquiry Form

1. Feedthrough Type
2. Thread Size Required

  see table
3. Element Size

 see table
4. No. of Elements

 see table
5. Sealant Type

6. Quantity Required

Contact Details

Company Name


Your Name


Title/Dept.


Email


Telephone


Additional Information

If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below



Send Enquiry  

We will only use your email address to contact you. We will never give your email address to 3rd parties and we do not sell data on to any other company. We prefer to concentrate on making quality temperature related products. Our privacy policy can be viewed here.

BACK TO TOP
Products

Contact Us

About TC

FREE Guide

Privacy Policy

Terms and Conditions

Sitemap
FREE Wallchart Guide to
Thermocouples and RTD Sensors


Join over 500,000 engineers and buyers who have already received our FREE 74 page A3 Guide to Thermocouple and Resistance Thermometry

Company Name
  Address 1
Your Name
  Address 2
Title / Dept.
  County / Region / State
Email
  Postcode / ZIP Code
Telephone
  Country
Company Name
Your Name
Title / Dept.
Address 1
Address 2
County / Region / State
Postcode / ZIPCode
Country
Email
Telephone

We will only ever use the information you provide to occasionally contact you regarding our products and we will never disclose your details to a third party. Our privacy policy can be viewed here



I agree to the terms and conditions listed in the Privacy Policy

View our ISO 90001/2008 Certficate
View our ISO 90001/2008 Certficate







Thermocouple Sensors
Mineral Insulated Thermocouples
Thermocouples with Mini Plug
Thermocouples with Terminal Head
Thermocouples with Cable
High Temperature Thermocouples
General Purpose Thermocouples
ATEX/IECex Thermocouple Sensors
Ceramic Thermocouple Sensors
Fast Response Thermocouple Sensors
Autoclave Thermocouple Sensors
Surface Measurement Thermocouple Sensors
FEP Insulated Thermocouple

Platinum Resistance Thermometers
Mineral Insulated RTD Pt100 Sensors
Rigid Stem RTD Pt100 Sensors
Hand Held RTD Pt100 Sensors
Surface Measurement RTD Pt100 Sensors
RTD Pt100 Sensors with Cable
RTD Pt100 Sensors with Mini Plug
Autoclave RTD Pt100 Sensors
RTD Pt100 with Terminal Head
ATEX/IECex Platinum Resistance Thermometers
Fast Response RTD Pt100 Sensors
Air Temperature RTD Pt100 Sensors
Magnetic RTD Pt100 Sensors
Cable
PVC Single Pair Thermocouple Cable
PFA Single Pair Thermocouple Cable
Fibreglass Single Pair Thermocouple Cable
PVC Multipair Thermocouple Cable
PFA Multipair Thermocouple Cable
Fibreglass Multipair Thermocouple Cable
PVC RTD Pt100 Cable
PFA RTD Pt100 Cable
Fibreglass RTD Pt100 Cable

Miniature Thermocouple Connectors
Mini Thermocouple Connectors – 220ºC Rated
Mini Thermocouple Connectors – 350ºC Rated
Mini Thermocouple Connectors – 650ºC Rated
Mini Thermocouple Connector Accessories
Mini Thermocouple Connector Panels
Mini Three Pin Connectors

Standard Thermocouple Connectors
Standard Thermocouple Connectors – 220ºC
Standard Thermocouple Connectors – 350ºC Rated
Standard Thermocouple Connectors – 650ºC Rated
Standard Thermocouple Connector Accessories
Standard Thermocouple Connector Panels
Standard Three Pin Connectors
Instrumentation
Hand Held Indicators
Panel Indicators
Temperature Transmitters
Temperature Controllers
Temperature Programmers
Temperature Calibrators
Chart Recorders
Multi Channel Indicator
DIN Rail Mounted Transmitters
Head Mounted Transmitters
ATEX/IECEx Rated Transmitters
Dry Block Calibrator
Temperature Dataloggers

Temperature Accessories
Compression Fittings
Pressure and Vacuum Feedthroughs
ATEX/IECEx Compression Fittings

Calibration
UKAS Calibration Services

Pressure
Pressure Gauges
Pressure Transmitters


© 1998- TC Ltd., P.O. Box 130, UXBRIDGE, UB8 2YS, United Kingdom
Tel.: 01895 252222, Email: info@tc.co.uk
© 1998- TC Ltd., P.O. Box 130, UXBRIDGE, UB8 2YS, United Kingdom
Tel.: 01895252222, Email: info@tc.co.uk