ATEX Approved Pressure and Vacuum Feedthroughs

Series MF - Feedthroughs for multiple elements

Send Enquiry Request Info

Also available with IECEx Approval Also available with EAC Ex Approval

A single access port into an enclosure or process vessel is all that is needed to allow multiple probes, sensors, etc., to pass through an environmental or pressure boundary using a single feedthrough assembly.

Series MF feedthroughs can seal multiple elements within a single assembly including typically up to 40 x 1.0mm dia., up to 27 x 3.0mm or up to 7 x 6.0mm elements. Please refer to the table for further details of feedthrough capacity and sizes of elements.

There are five body sizes having 1/8”, 1/4”, 1/2”, 3/4” and 1”process connections in either BSPT (conical gas or DIN 2999 ‘R’) and NPT threads.

Spectite^® feedthroughs are designed for ease of assembly and installation. Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions.

ATEX Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
Saves time and costs as multiple sensors pass through one feedthrough
Immersion length of each element can be easily adjusted
Five sizes of sealed feedthrough for probes, sensors, etc.
Designed for carrying multiple elements
Suitable for a mixture of sizes and types of elements
Pressure range: Vacuum to 700 bar*
Temperature range: -60°C to +450°C*
316L Body (and seat where applicable). Follower and cap in 303 or 304
Reusable fitting – sealant and internal components replaceable

* Dependent on sealant and fitting selected

ATEX Approved Pressure and Vacuum Feedthroughs

Series MF - Feedthroughs for multiple elements

Enquiry Form