ATEX Approved Thermocouples for the Petrochemical, Oil and Gas Industries
with Spring Loaded Terminal Block
Send Enquiry
Data Sheet
Request Info
Also available with IECEx Approval Also available with EAC Ex Approval
These semi rigid ATEX approved thermocouples are supplied with a spring loaded terminal block and can be used to replace an insert in an existing application. They can be used with service temperatures up to 1250ºC (minimum stand-off lengths must be observed).
- Available in a wide range of protection concepts for Zones 0, 1 & 2 use. See table below for details
- Temperature classification T6-T1, see here for stand-off requirements
- Available in thermocouple types K, T, J, N, E, R, S and B
- Sheath diameters from 3.0mm to 8.0mm in a wide choice of materials
- Insulated measuring junction gives a floating output with high insulation resistance
- Simplex, duplex and triplex sensors available
- UKAS calibration available.
Available with the following approvals:
| Protection Type | Description | Zone |
| Ex nA IIC Gc | Non-Sparking (Gas) | 2 |
| Ex ia IIC Ga / IIIC Da | Intrinsically Safe (Gas/Dust) | 0/20 |
