Products

Temperature Sensors

Cables

Thermocouple and RTD Connectors

Temperature Instrumentation

Compression Fittings and Feedthroughs

Thermowells

Flanged & Threaded Thermowells

AMS2750 Approved Thermocouples

ATEX / IECEx

ATEX / IECEx Approved Products

Calibration and Services

Pressure

EAC Ex Approved RTD Pt100 Sensors for the Petrochemical, Oil and Gas Industries

with Termination Entry Gland

Send Enquiry Data Sheet Request Info

Also available with ATEX Approval Also available with IECEx Approval

Our EAC Ex approved mineral insulated platinum resistance thermometers utilise, as standard, detector elements with a resistance of 100 ohms @ 0°C and a fundamental interval of 38.5 ohms to IEC 60751. Single and duplex elements are available.

Available in a wide range of protection concepts for Zones 0, 1 & 2 use. See table below for details
Temperature classification T6-T1, see here for stand-off requirements
Available in B, A, 1/3, 1/5 and 1/10 grade accuracies
Metrological / Pattern Approval Certificate (PAC) for Russia also available on request, contact us for details
Additional Primary verification “POVERKA” available on request, contact us for a quotation if required

Sheath diameters from 3.0mm to 8.0mm
Terminated in a compression gland pot seal with 100mm Kapton® sleeved tails
Wide operating temperature range of -100°C to +600°C
UKAS calibration available.

Available with the following approvals:

Protection Type	Description	Zone
Ex d IIC Gb	Flameproof (Gas)	1
Ex ia IIC Ga / IIIC Da	Intrinsically Safe (Gas/Dust)	0/20
Ex tb IIIC Db	Enclosure (Dust)	21
Ex tc IIIC Dc	Enclosure (Dust)	22

Enquiry Form

1. No. of Elements

2. Protection Concept

Concept Type	Select
Ex d Flameproof/Explosion Proof
Ex ia Intrinsically Safe
Ex tb Enclosure
Ex tc Enclosure

Your chosen concept is:

Ex d Flameproof/Explosion Proof – Category 2, Zones 1,2 (Gas)
• Ex d IIC T6...T1 Gb Ta = –40°C to 60°C
• Standard EN IEC 60079-1 refers
• Designed to contain an explosion and quench the flame
• Sensors incorporate a suitable heavy duty enclosure or threaded fitting with tight seals

Your chosen concept is:

Ex e Increased Safety – Category 2, Zones 1,2 (Gas)
• Ex e IIC T6...T1 Gb Ta = –40°C to 60°C
• Standard EN IEC 60079-7 refers
• Design ensures no arcs, sparks or hot surfaces that could ignite an explosive mixture with a minimum IP54 enclosure rating
• Sensors incorporate a suitable heavy duty enclosure or threaded fitting with tight seals

Your chosen concept is:

Ex ia Intrinsically Safe – Category 1, Zones 0,1,2 (Gas) & 20,21,22 (Dust)
• Ex ia IIC T6...T1 Ga Ta = –40°C to 60°C
• Standard EN IEC 60079-11 refers
• Designed to limit the energy of arcs or sparks that could potentially ignite an explosive mixture
• Sensors used in this area must be wired through a suitably approved barrier
• Optional approved 4 to 20mA transmitters available

Your chosen concept is:

Ex nA Non-Sparking – Category 3, Zone 2 (Gas)
• Ex nA IIC Gc T6…T2
• Standard EN IEC 60079-15 refers
• No arcs, sparks or hot surfaces

Your chosen concept is:

Ex tb Enclosure – Category 2, Zones 21, 22 (Dust)
• Ex tb IIIC T80°C…T440°C Db
• Standard EN IEC 60079-31 refers
• Protects against combustible and conductive dusts, rugged tight enclosures are used

Your chosen concept is:

Ex tc Non-Sparking – Category 3, Zone 22 (Dust)
• Ex tc IIIC T85°C...T450°C Dc
• Standard EN IEC 61241 refers
• Protects against combustible dusts
• Sensors incorporate a suitable heavy duty enclosure with IP6X seal

3. Number of Wires

4. Sheath Diameter

5. Sheath Length

mm*

6. Tolerance of Element

Grade	Accuracy @ 0ºC	Accuracy @ 100ºC	Select
B	+/- 0.30ºC	+/- 0.80ºC
A	+/- 0.15ºC	+/- 0.35ºC
1/3	+/- 0.08ºC	+/- 0.19ºC
1/5	+/- 0.05ºC	+/- 0.15ºC
1/10	+/- 0.03ºC	+/- 0.12ºC

7. Termination Style

Illustration	Select
Brass Entry Gland
Stainless Steel Entry Gland
Thread Size: 16mm ISO 20mm ISO
End Seal Temperature Rating: 90°C (standard) 230°C 260°C

8. Extension Leads

Illustration	Select
PVC (rated to 105ºC) End Seal rated to 120ºC
PFA (rated to 250ºC) End Seal rated to 230ºC
Please enter Cable length in metres mtrs

9. Optional Compression Fitting

10. Quantity Required

Qty Required

Contact Details

Company Name

Your Name

Email

Telephone

Additional Information

If your enquiry is for more than one style of sensor, please email us with your requirements or use the box below

Send Enquiry

Products

Contact Us

About TC

FREE Guide

Privacy Policy

Terms and Conditions

Sitemap

FREE Wallchart Guide to
Thermocouples and RTD Sensors

Join over 500,000 engineers and buyers who have already received our FREE 74 page A3 Guide to Thermocouple and Resistance Thermometry

Company Name		Address 1
Your Name		Address 2
Title / Dept.		County / Region / State
Email		Postcode / ZIP Code
Telephone		Country

Company Name

Your Name

Title / Dept.

Address 1

Address 2

County / Region / State

Postcode / ZIPCode

Country

Telephone

We will only ever use the information you provide to occasionally contact you regarding our products and we will never disclose your details to a third party. Please see our privacy policy for more details.

I agree to the terms and conditions listed in the Privacy Policy

Thermocouple Sensors

Platinum Resistance Thermometers

Cable

Miniature Thermocouple Connectors

Standard Thermocouple Connectors

Instrumentation

Temperature Accessories

Calibration

Pressure

Assemblies with pot seals are supplied with short tails as shown. However, where leads are several metres or more long, it is more suitable to have an overall sheathed cable. We recommend the following cables.

Wiring Diagram Sheath Materials