IECEx Approved Pressure and Vacuum Feedthroughs
Series PF - Feedthroughs for single elements
Where a sensor, probe, tube or other single element needs to penetrate a pressure or environmental boundary, series PF glands can be used.
The following thread sizes are available: 1/8", 1/4", 1/2", 3/4" and 1" with BSPT (conical gas or DIN 2999 ‘R’) and NPT threads. The minimum element size is 0.5mm, the maximum is 25.4mm (1").
Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions. Spectite® feedthroughs are designed for ease of assembly and installation.
The following thread sizes are available: 1/8", 1/4", 1/2", 3/4" and 1" with BSPT (conical gas or DIN 2999 ‘R’) and NPT threads. The minimum element size is 0.5mm, the maximum is 25.4mm (1").
Elements can be adjusted, removed and replaced when not under pressure or vacuum conditions. Spectite® feedthroughs are designed for ease of assembly and installation.
- Sensors, small bore tubes, probes and more can be used with a PF fitting
- IECEx Approved to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da
- The immersion depth of the sensor can be adjusted very easily and as many times as necessary
- The following thread sizes are available: 1/8", 1/4", 1/2", 3/4" and 1"
- Easy installation of single elements 0.5mm to 25.4mm (1”) diameter
- Temperature ranged from -60°C to +450°C*
- Pressure range is from Vacuum to 700 bar*
- Internal components are reusable
- All metal parts are made from 316L Stainless Steel
- Three sealant materials are available * Dependent on sealant and fitting selected
