ATEX Approved Spring Loaded Thermocouples for the Petrochemical, Oil and Gas Industries
with a choice of Terminal Heads
Send Enquiry
Data Sheet
Request Info
Also available with IECEx Approval Also available with EAC Ex Approval
Also available with IECEx Approval Also available with EAC Ex Approval
These semi rigid ATEX approved spring loaded thermocouples are supplied with an IP68 terminal head and threaded flameproof extension and are ideal for installation in thermowell pockets and where good contact with the process is required.They can be used with service temperatures up to 1250ºC (minimum
stand-off lengths shown on here must be observed).
- Available in a wide range of protection concepts for Zones 0, 1 & 2 use. See table below for details
- Temperature classification T6-T1, see here for stand-off requirements
- Available in thermocouple types K, T, J, N, E, R, S and B
- Sheath diameters from 4.5mm to 8.0mm in a wide choice of materials
- Insulated measuring junction gives a floating output with high insulation resistance
- Spring loaded thermocouple insert with wide choice of process connections
- UKAS calibration available.
Available with the following approvals:
Protection Type | Description | Zone |
Ex nA IIC Gc | Non-Sparking (Gas) | 2 |
Ex d IIC Gb | Flameproof (Gas) | 1 |
Ex ia IIC Ga / IIIC Da | Intrinsically Safe (Gas/Dust) | 0/20 |
Ex ib IIC Gb / IIIC Db | Intrinsically Safe (Gas/Dust) | 1/21 |
Ex tb IIIC Db | Enclosure (Dust) | 21 |
Ex tc IIIC Dc | Enclosure (Dust) | 22 |